Products

Teensy and related products from PJRC.  See this table for comparison of all Teensy technical specs.

32-Bit Products and Accessories

Primary 32-bit Products:

Cables, pins, sockets and accessories are also available on the left side links.

8-Bit Products and Accessories

Primary 8-bit Products:

Cables, pins, sockets and accessories are also available on the left side links.

Products for Teensy From Other Companies

These are not made or sold by PJRC.

LiPo battery charger – Add rechargeable battery – Pesky Products / Tindie

OLED 128×32 Pixel Screen – Fits very nicely on top of Teensy LC & 3.2 – Sparkfun

Header & Socket Kit – Pins and sockets for stacking shields – Sparkfun

E-Paper Shield Kit – E-paper sunlight readable display – Soniktech / CrowdSupply

MAX9814 Microphone – Low noise mic for analog pin input – Neutronned / Tindie

Teensy 3.2 Breakout – Easily access all pins, even bottom side pads – Tall Dog / Tindie

Teensy 3.5 / 3.6 Breakout – Access all pins & USB host – Tall Dog / Tindie

Arduino Shield & nRF24L01 – Add wireless and use Arduino shields – Pico / Tindie

Arduino Mega Shield, Wifi, Bluetooth, nRF24L01 – Burgessworld Custom Electronics / Tindie

Feather Adapter – Connect Adafruit Feather shields – Adafruit

TinyGPS Backpack – Add GPS with minimal size – Fusion / Tindie

Slim Micro SD – Add a SD card to Teensy 3.2 with minimal size – Fusion / Tindie

TinyTracker GPS/GSM/CAN – Fusion / Tindie

nRF24L01 Add-On – Tiny wireless shield – Pesky Products / Tindie

M41T62 RTC – Clock, Storage, Pressure/Humidity/Temp Sensors – Pesky Products / Tindie

10DOF Motion Sensor – Mounts on bottom of Teensy 3.2 – Fusion / Tindie

ToF Distance Sensor – Precise proximity measurement, 5-200 cm – Fusion / Tindie

Arduino Shield & Proto Board – Petit Studio / Tindie

thingSoC Adapter – connect thingSoC, Mikrobus, Grove Modules – thingSoC

ESP8285 Add-On – smallest ESP8266 Wifi – Pesky Products / Tindie

Daul CAN Bus – Access both CAN bus ports on Teensy 3.6 – Fusion / Tindie

T. Chordstrum – MIDI Chord Controller – Yoe / Tindie

DIY Products, Some Assembly Required

MemoryBoard – Add audio delay buffer memory – Frank Boesing / OSH Park

ConnectorBoard – Smallest size Teensy 3.2 bottom pads breakout – Frank Boesing / OSH Park

Super Audio Board – Professional quality audio – RF William Hollendar / Hackaday.io

Breakout Board R2 – Larger Teensy 3.2 bottom pads breakout – Frank Boesing / OSH Park

CAN Shield – Connect CAN bus to Teensy 3.2 – Piat Jonathan / OSH Park

3D Printed Case for Teensy 2.0 – dgnuff / TinkerCAD

Teensy Saber V3 – Build a sound reactive LED light saber – Fredrik Hübinette

Teensy LC Breakout – Connect wires via terminal blocks – Pete Prodoehl

10DOF Motion for Teensy 3.6 – Mounts on bottom of Teensy 3.6 – Pesky Products / Tindie

Open Panzer Sound Card – Open Panzer / OSH Park